HP LaserJet Pro M1536dnf MFP SERIES - Manual (Page 56)

Supported network operating systems
The following operating systems support network printing:
Recommended software
installation
● Windows XP (32-bit, Service Pack
2)
● Windows Vista (32-bit and 64-bit)
● Windows 7 (32-bit and 64-bit)
Print and scan driver
● Windows Server 2003 (32-bit,
Service Pack 3)
● Windows Server 2008
Printer driver only
● Linux (Web only)
● UNIX model scripts (Web only)
Printer sharing disclaimer
HP does not support peer-to-peer networking, as the feature is a function of Microsoft operating systems
and not of the HP printer drivers. Go to Microsoft at
www.microsoft.com .
Connect with USB
NOTE: Do not connect the USB cable from the product to the computer until the installer prompts you
to do so.
1. Insert the product CD into your computer. If the software installer does not start, navigate to the
setup.exe file on the CD and double-click the file.
2. Follow the installer instructions.
3. Allow the installation process to complete, and then restart the computer.
Connect to a network
Supported network protocols
To connect a networking-equipped product to a network, you need a network that uses one or more of
the following protocols.
● TCP/IP (IPv4 or IPv6)
● Port 9100
● LPR
● DHCP
● AutoIP
● SNMP
● Bonjour
● SLP
● WSD
42 Chapter 5 Connect the product ENWW