HP LaserJet Pro M1536dnf MFP SERIES User Manual
Page 160
Control panel message
Description
Recommended action
Fax memory full
Canceling send
During the fax job, the memory filled. All
pages of the fax have to be in memory for a
fax job to work correctly. Only the pages that
fit into memory were sent.
Print all received faxes or wait until all
pending faxes are sent.
Ask the sender to send the fax again.
Ask the sender to divide a large fax job into
smaller sections, and then fax them
individually.
Make sure that the resolution of the sending
fax machine is not set to the Photo setting or
the Superfine setting.
Cancel all fax jobs or clear the faxes from
memory.
Fax recv. error
An error occurred while trying to receive a fax. Ask the sender to resend the fax.
Try faxing back to the sender or another fax
machine.
Check for a dial tone on the phone line by
touching the
Start Fax
button.
Check that the telephone cord is securely
connected by unplugging and replugging the
cord.
Make sure that you are using the telephone
cord that came with the product.
Make sure that the phone is working by
disconnecting the product, plugging in a
telephone to the phone line, and making a
voice call.
Decrease the fax speed. Ask the sender to
resend the fax.
Turn off error-correction mode. Ask the
sender to resend the fax.
NOTE:
Turning off error-correction mode
can reduce the quality of the fax image.
Connect the product to a different phone line.
If the error persists, contact HP. See
or the
support flyer that came in the product box.
146 Chapter 10 Fax
ENWW