HP LaserJet Pro M1536dnf MFP SERIES - Manual (Page 163)

Control panel message Description Recommended action
No fax answer
Redial Pending
The receiving fax line did not answer. The
product attempts to redial after a few minutes. Allow the product to retry sending the fax.
Call the recipient to ensure that the fax
machine is on and ready.
Check that you are dialing the correct fax
number.
If the product continues to redial, unplug the
product telephone cord from the wall, plug in
a telephone, and try making a voice call.
Make sure that the phone cord from the wall
telephone jack is plugged into the line
port.
Plug the product phone cord into a jack for
another phone line.
Try a different phone cord.
If the error persists, contact HP. See
www.hp.com/support/ljm1530series or the
support flyer that came in the product box.
No fax detected The product answered the incoming call but
did not detect that a fax machine was calling. Allow the product to retry receiving the fax.
Try a different phone cord.
Plug the product phone cord into a jack for
another phone line.
If the error persists, contact HP. See
www.hp.com/support/ljm1530series or the
support flyer that came in the product box.
ENWW Solve fax problems 149