HP Designjet 2500.3500cp Printer series User Manual

Page 297

Advertising
background image

Front-Panel Messages

Message Explanations and Actions

12-19

STATUS
Initializing

The printer is doing an internal check on power-up.

Wait until the printer has finished initializing.

STATUS
Ink drying (xx m xxs)

The ink on your print is drying.

Wait before removing the print. If you remove it before the indicated time has passed,
avoid smearing the ink.

STATUS
Lens maintenance

The lens cover on the printhead carriage requires maintenance.

Press the

Replace Ink System

key to replace the lens cover with a new one. Spare

lens covers are inside the right door. See the instructions for lens cover replacement
on page 10-3, Lens Maintenance.

STATUS
Loading roll

The printer is loading roll media.

Wait for the loading to complete.

STATUS
Loading sheet

The printer is loading sheet media.

Wait for the loading to complete.

STATUS
Low on ink

One or more of the four ink systems are out of ink.

Press the

Replace Ink System

key to replace the ink systems affected, if the last

print showed any degradation in image print quality. If there is still a large amount
of ink remaining in the ink cartridges, see

the message Printhead failure on page

12-12

.

STATUS
Maintenance advised

The printer is being used more intensively than the recommended duty cycle.

You should contact your local HP dealer or HP service engineer to arrange a
service. If you choose to ignore the message, you may continue to use the printer as
normal, but may encounter a number of operational or print-quality problems.

STATUS
Measuring pattern

The printer is measuring the accuracy calibration print that you just loaded.

Wait for the calibration to complete.

STATUS
Out of media

The printer has received a file, is ready to print, but has no media loaded.

Load appropriate media.

STATUS
Pause pending

You have pressed the

Pause

key but the printer was busy performing a previous

action. The printer will pause when it has completed its current action.

Wait for the current action to complete.

Message

Explanation and Action

Advertising
This manual is related to the following products: