HP Designjet 2500.3500cp Printer series - Manual (Page 77)

Working with Media
Unloading Media from the Take Up Reel accessory
3-27
3 The front panel displays:
4 Press continue.
5 Press the media wind button shown below to wind the media hanging down onto the
Take Up Reel. The front panel displays:
6 After winding up the Take Up Reel press the
↓
key. The cutter cuts the media.
7 Press the media wind button again on the Take Up Reel until the media is wrapped
around the core.
C4704016
Remove Media Weight
Continue----------->
C472337
C4704016
Wind the Take Up Reel
Cut ------------------>
Media wind
button