HP Designjet 2500.3500cp Printer series - Manual (Page 86)

Working with Media
Changing the Core Tube on the Take Up Reel Accessory
3-36
3 Remove the left-hand media guide.
4 Remove the old Take Up Core.
5 Install the new Core you have chosen onto the spindle and re-install the left hand
guide assembly.
NOTE:You can also use an empty cardboard tube to replace the plastic Take Up
Core that was supplied with your printer.
It is important that the Take Up Core is the same width as the media you are using.
By matching color coded lengths of plastic tube, you can make a Take Up Core for
different widths of standard media sizes: 24”,36”.
12'' / 3
05m m
+
54''/1372mm =
+ 36''/915mm =
+ 50''/1270mm =
24'' / 610mm
+
54''/1372mm =
+ 36''/915mm =
+ 50''/1270mm =
24'' / 610mm
C470367a