HP Designjet 2500.3500cp Printer series - Manual (Page 81)

Working with Media
Removing a Roll from the Printer
3-31
4 Remove the old roll by pulling firmly on each end of the spindle, A then B.
5 Rest the old roll vertically so that the fixed spindle media guide is on the floor. Pull
out the removable spindle media guide and then remove the roll of media from the
spindle.
6 You have completed removing the old roll media from the printer. If you are not
immediately loading another roll of media into the printer, replace the removable
spindle media guide onto the spindle and install it back into the printer.
To load a new roll of media, continue with the next section, Installing a New Roll
into the Printer.
C4704121a
A
B
C472374