HP Designjet 2500.3500cp Printer series - Manual (Page 107)

Working with Ink Systems
Removing and Replacing Ink Systems
4-11
Removing and Replacing Ink Systems
NOTE:It is very important that you do not mix ink systems up. The UV ink systems
and other non-UV ink systems are not compatible. Contamination of one ink system
with the other will result in you having to replace both the ink systems.
The front-panel display will prompt you to replace components in the following
order:
1 Remove and replace printheads.
2 Remove and replace printhead cleaners.
3 Remove and replace ink cartridges.
The components of the ink system are numbered to match the sequence in which
they must be installed. The number is printed on the printhead cleaner and ink
cartridge, and on the sleeve containing the printhead.
Remember:
n Always change all three components for each ink color system at the same time.
n Use only the components that come together in their box. Never mix the
components with the same or different colors from other boxes.
n Never mix Imaging Ink Systems and UV Ink Systems or components, the printer
will not work.
Printhead Cleaner
Printhead
Ink Cartridge
C2704112