HP Designjet 2500.3500cp Printer series - Manual (Page 138)

Controlling the Page Format
Adjusting Margins for Roll and Sheet Media
5-12
Adjusting Margins for Roll and Sheet Media
Besides nesting and setting the page size, you can also change the margin settings
and expand the printing area of the page, reducing the amount of media waste. The
two side margins are 15.0 mm. The default margin settings for the leading and
trailing edges of the media vary, depending whether you are using roll or sheet
media, as shown in the illustrations below:
Page format
Margins
Full menu mode
Default: Extended
Affects next file
C4704004
Normal Smaller Extended*
17.0 mm
15.0 mm
10.0 mm
(0.59 in)
15.0 mm
(0.59 in)
15.0 mm
(0.59 in)
15.0 mm
(0.59 in)
(0.67 in)
19.0 mm
(0.75 in)
(0.4 in)
10.0 mm
(0.4 in)
Trailing Edge
Leading Edge
27.0 mm
(1.06 in)
29.0 mm
(1.14 in)
Roll Media
Printing Area
Page Size
C4704004
Normal Smaller Extended*
17.0 mm
15.0 mm
10.0 mm
(0.59 in)
15.0 mm
(0.59 in)
15.0 mm
(0.59 in)
15.0 mm
(0.59 in)
(0.67 in)
17.0 mm
(0.67 in)
(0.4 in)
10.0 mm
(0.4 in)
Trailing Edge
Leading Edge
27.0 mm
(1.06 in)
27.0 mm
(1.06 in)
Sheet Media
Printing Area
Page Size