HP Designjet 2500.3500cp Printer series - Manual (Page 140)

Controlling the Page Format
Adjusting Margins for Roll and Sheet Media
5-14
Non-PostScript Files
Only For roll media if you select Smaller in the Margins menu selection, you can reduce
the margins to 10 mm on the leading and trailing edges of the media.
NOTE If Smaller margins are selected, the Nesting auto-rotation feature is disabled.
Pages will not be automatically rotated.
Non-PostScript Files
Only
Margins and Automatic Cutting
When the Margins setting is set to Smaller , the printer waits for the print to dry and
the next file to begin printing before cutting the page from the roll. If you press
Form Feed and Cut, the printer immediately cuts off the current page. When the
next file begins, the printer cuts the media again to give this page the narrow
margin.
Print Margins using the HP DesignJet CP UV Ink System
When printing with UV inks with extended or normal margins selected, the leading
edge margin will increase by 27.0mm (1.06 inch). The total leading edge margin for
UV Opaque vinyl selection on roll media will be:
Margin Selection Leading Edge Margin Dimension
Normal 46.0mm (1.81 inches)
Extended 56.0mm (2.20 inches)