HP Designjet 2500.3500cp Printer series - Manual (Page 153)

Controlling the Overall appearance of a Print
Changing Pen Widths and Colors Using the Internal Palettes
6-5
Viewing Current Config. Settings
1 Make sure either a roll or a sheet of media is loaded.
2 Make sure that the front-panel Color/Mono switch is set to Color.
3 Print the Current Configuration Print, by pressing the
↑
and
↓
keys simultaneously.
Notice on the Current Configuration Print that the 16 pens are numbered 0 through
15 and the 256 colors are numbered 0 through 255. These colors are specified in the
Palette Print, as explained in the following sections.
NOTE:These settings have no effect on PostScript files.
C4704000
Press these two
keys simultaneously
STATUS
Ready