HP Designjet 2500.3500cp Printer series - Manual (Page 190)

Reconfiguring Your Printer
Changing the Graphics Language
8-8
Changing the Graphics Language
To Change the Graphics Language Setting
2500CP Only To change the graphics language setting, go to the Device setup/Lang menu. There
are three selections, as follows:
Graphics
Language Comments
Automatic Choose Automatic to let the printer determine which type of
file it is receiving. This setting works for most software
applications.
PostScript
Choose PostScript if you are printing only PostScript files
and your PostScript jobs do not include PJL language
switching commands
.
HP-GL/2 Choose this setting if you are not working with PostScript
files and:
■ you have experienced image position problem.
■ you have experienced timing problems.
DEVICE SETUP
Lang=
Full menu mode only
Default: Automatic