HP Designjet 2500.3500cp Printer series - Manual (Page 193)

Reconfiguring Your Printer
Changing the Interface Settings
8-11
Upgrading Your Printer with More Memory
2500CP Only Your printer comes with 32 MB of memory plus 4 MB of internal printing memory.
You can expand the memory up to a maximum of 68 MB by adding additional 4-MB,
8-MB, 16-MB, and 32-MB memory expansion modules. In addition to this memory,
the printer has an internal hard disk drive used as extended memory for PostScript
rendering and print management.
If you occasionally get “Out of memory” error messages when printing, this may be
an indication that you need to add more memory to your printer. Adding memory
may also slightly improve performance when printing some files.
2000CP Only Your printer comes with 4 MB of memory plus 4 MB of internal printing memory.
You can expand the memory up to a maximum of 68 MB by adding additional 4-MB,
8-MB, 16-MB, and 32-MB memory expansion modules.
See page 13-18, Ordering Accessories, for HP part numbers for the memory
modules. For installation details, see the Setup Guide supplied with the printer.