HP Designjet 2500.3500cp Printer series - Manual (Page 244)

Troubleshooting
Solving Color Accuracy problems
11-24
Configuration
The configurations of the printer, the driver, and/or the Software RIPs define how
ink is applied to each type of media. Use the information in the following table to
configure your printer and software for best color accuracy.
Media
Always make sure that you are using the appropriate media for your image and that
it is consistent with your software application. To ensure color accuracy and print-
quality performance of the printer, use only media types that have been certified for
your printer. Use of non-HP media or HP media not certified for the your printer
may significantly reduce the color and print quality of your images. For details of
HP media, see page 3-4, Supported Media Types and the Media Guide for the HP
DesignJet CP Printers supplied with the printer.
Location of Setting Setting Description Selection
Printer Front-Panel Menu Media
n
Set to match the media
type loaded in the
printer. See page 3-4,
Supported Media Types.
Color Calibration
n
Select Color Calibration
to Now.
Printhead check /
Frequency
n
Set to 1 page.
Non-HP drivers
(Software RIPS) Media or equivalent setting
n
Set to match the media
type loaded in the
printer. See the
documentation that
came with your software
for information.
Color correction option or
equivalent.
n
Do the color correction
calibration if one is
available.