HP Designjet 2500.3500cp Printer series - Manual (Page 317)

Reference
Declaration of Conformity
13-17
Declaration of Conformity
DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name:
Manufacturer’s Address: Hewlett-Packard Española S.A.
Barcelona Division
Avenida Graells, 501
08190 Sant Cugat del Valles
HP Take Up Reel
declares that the product
Product Name:
Model Number (s):
Product Accessory:
HP C4723-60020, HP C6246A
conforms to the following Product Specification:
Safety: IEC 950 (1991) + A1,A2,A3 / EN 60950 (1992) + A1,A2,A3(1)
CSA C22.2 No 950 (1995)
UL 1950 (1995)
NOM-019-SCFI-1994
EMKO-TSE (74) DK 207/94
GB 4943 (1990)
EMC:
CISPR 22:1993 / EN 55022 (1994): Class B (1)
EN 50082-1 (1992)
IEC 801-2:1991/prEN 55024-2 (1992): 4KV CD, 8KV AD
IEC 801-3:1984/prEN 55024-3 (1991): 3V/m
IEC 801-4:1988/prEN 55024-4 (1993): 1KV Power Lines,
0.5KV Signal Lines
Supplementary Information:
The product herewith complies with the requirements of the Low-Voltage Directive 73/23/EEC and the
EMC Directive 89/336/EEC and carries the CE marking accordingly.
(1) This product was tested in a typical system with a Hewlett Packard DesignJet series printer
Sant Cugat del Valles (Barcelona),
July 31st 1998
Jordi Balderas,
Quality Engineering Manager
European Contact: Your local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department HQ - TRE,
Herrenberger Strasse 130, D-71034 Boeblingen, Germany (FAX: +49 7031 143143)
Barcelona, Spain
IEC 1000-3-3:1994/EN 61000-3-3 (1995)
EN 50081-1 (1992)
FCC Part 15-Class B/Doc-B
AS/NZS 3548/BCIQ-A