HP Designjet 2500.3500cp Printer series - Manual (Page 48)

Using the Front Panel
Navigation Examples
2-26
Changing the Drying Time
This example adjusts the drying time, a setting used to suit different environmental
conditions, in the
DRYING TIME menu. The printer must be in full menu mode for
this example.
u Make sure the
STATUS display level is shown on the front panel.:
1 Press the Enter key to enter the menu system.
Either the SHORT MENUS screen or the FULL MENUS screen is displayed with the
Queueing & Nesting option. If necessary, see page 2-16, Selecting the Full Menu
Mode, to change to Full Menu mode.
2 Press the
↑
key or the
↓
key until the Device Setup menu is displayed.
3 Press the Enter key.
4 Press the
↑
key or the
↓
key until DRYING TIME is displayed.
C4704034
STATUS
Ready
C4704034
FULL MENUS
Queueing & Nesting
C4704034
FULL MENUS
Device Setup
→
C4704034
DEVICE SETUP
Lang=Automatic
→
C4704034
DEVICE SETUP
Drying time=Automatic
→