HP Designjet 2500.3500cp Printer series - Manual (Page 82)

Working with Media
Installing a New Roll into the Printer
3-32
Installing a New Roll into the Printer
1 If an empty spindle is installed in the printer, open the roll cover and remove the
empty spindle by pulling firmly on each end, A and then B as shown below.
2 Remove the new roll from its wrapping.
3 HP Heavyweight Coated Paper is the only media that is compatible with both the
HP DesignJet CP Ink System and the HP DesignJet CP Ink System UV. Therefore,
if you have changed the Ink System and the media you are loading is incompatible
with the new Ink System, the printer will automatically reject the non-compatible
media. See page 3-2, Choosing Media.
C4704118a
B
A