HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 104)

Virtual Connect networks 104
Use this screen to edit the properties of an existing shared uplink set, add an associated network, or delete
an associated network. This screen has the same fields as the Define Shared Uplink screen. The screen can
be edited only by users with network privileges, but it is viewable by all authorized users.
The following table describes the fields within the Edit Shared Uplink Set screen.
Field name Description
Ethernet Shared External Uplink
Set
Uplink Set Name Descriptive name for the shared uplink set. Do not use spaces.
External Uplink Ports
Port Enclosure, bay, and port number
Port Role Displays whether the port is designated as primary or secondary
Port Status Shows the link status, link speed, and connectivity of the port. If the port is
unlinked and no connectivity exists, the cause is displayed. For more
information about possible causes, see "Port status conditions (on page
208 )."
Connector type The type of connector on the port; for example, RJ-45
Connected to If the individual port is connected to a switch that supports LLDP, the switch
MAC address and switch port number appear. A link is provided to obtain
more information about the far-end switch port.
PID PID status icon (illuminated or not illuminated) for the port
Speed/Duplex Pull-down menu to specify the speed and duplex (where applicable) of the
uplink port. Half-duplex operations are not supported by the VC-Enet
module.
Action
Perform delete operations
Associated Networks
(VLAN-tagged)