HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 21)

Virtual Connect domains 21
The following table describes the available actions in the Domain Settings (IP Address) screen. Clicking
another link in the pull-down menu or left navigation tree causes current edits that have not been applied to
be lost.
Task Action
Use a VC domain IP address Select the box next to Use Virtual Connect Domain IP Address, and
then enter the IP Address, Subnet Mask, and Gateway.
Save changes Click Apply.
Cancel without saving changes Click Cancel.
Domain Settings (Enclosures) screen
Use this screen to view, add, or remove enclosures in the domain.
Multiple enclosures are supported only if an appropriate primary and backup VC module is running in the
local enclosure.