HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 33)

Virtual Connect domains 33
Trap name Trap data Description
vcModOutputUtilizationDown port identification The output line utilization on a port has dropped below its
low-water mark for longer than 30 seconds. port is the
index of the affected port in ifTable.
vcModInputErrorsUp port identification
ifInErrors
The input error count on a port has exceeded its
high-water mark for longer than the error averaging
period. port is the index of the affected port in
ifTable.
vcModInputErrorsDown port identification
ifInErrors
The input error count on a port has dropped below its
low-water mark for longer than the error averaging
period. port is the index of the affected port in
ifTable.
vcModOutputErrorsUp port identification
ifOutErrors The output error count on a port has exceeded its
high-water mark for longer than the threshold averaging
period. port is the index of the affected port in
ifTable.
vcModOutputErrorsDown port identification
ifOutErrors The output error count on a port has dropped below its
low-water mark for longer than 30 seconds. port is the
index of the affected port in ifTable.
vcModPortBpduLoopDetected port identification
loop status
A network loop condition is detected on this port. If the
loop condition is detected on a Flex10 port, the trap data
indicates the physical port associated with the Flex10
port.
If multiple Flex10 ports on a physical port detect a loop
condition, a separate trap is sent for each occurrence of
the loop condition.
vcModPortBpduLoopDetected port identification
loop status
A network loop condition is cleared on this port. The trap
data indicates the physical port associated with a Flex10
port.
For Flex10 ports, this trap is sent only after all Flex10
ports on a physical port are cleared from a loop
condition.
Trap categories and required administrative privileges
In general, users with Domain privileges can manage any SNMP operations. Users with Network privileges
can manage Ethernet operations, and users with Storage privileges can manage FC operations. The
following table provides a summary of trap categories and the required administrative privileges.
Trap Category Domain Network Storage
VC-Enet Port Status
X X —
VC-Enet Port Threshold X X —
VC-Enet Other X X —
VC-FC Port Status X — X
VC-FC Other X — X
VCM Legacy X — —
VCM Security X — —
VCM Domain Status X — —
VCM Network Status X — —
VCM Fabric Status X — —