Test radius authentication – HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem User Manual
Page 67
Advertising
Virtual Connect users and roles 67
Test RADIUS authentication
Users with domain privileges can test their RADIUS configuration before making the configuration active.
To test a RADIUS configuration:
1.
Be sure that RADIUS group settings are configured.
2.
Access the RADIUS Settings (RADIUS Server) screen (on page
3.
Enter the RADIUS configuration information.
4.
Click Test. The RADIUS Configuration Test screen appears.
5.
Enter a valid user name and password.
6.
Click Test.
The status window displays any problems encountered during the test. When testing is complete, click Close.
Advertising
This manual is related to the following products: