Finding wwn for windows nt or windows 2000 – HP XP Array Manager Software User Manual
Page 34
Finding WWN for Windows NT or Windows 2000
HP currently supports the Emulex Fibre Channel adapter in a Windows NT or Windows 2000
environment, and will support other adapters in the future. For further information on Fibre Channel
adapter support, or if you are using a Fibre Channel adapter other than Emulex, contact HP technical
support for instructions on finding the WWN.
To find the WWN in a Windows NT or Windows 2000 environment with an Emulex Mini-Port Driver:
Note
: Although these instructions are written for Windows NT environment, similar instructions apply in a
Windows 2000 environment.
1.
Verify that the fibre adapters and the Fibre Channel device drivers are installed.
2.
Log in to the Windows NT or Windows 2000 host with administrator access.
3.
Go to the LightPulse Utility to open the LightPulse Utility/NT window (see
If you do not have a shortcut to the utility, do the following:
a.
Go to the Start menu, select Find, and then choose the Files and Folders option. The Find
dialog box appears.
b.
In the Named text field, enter lputilnt.exe.
In the Look in list box, choose the hard drive that contains the Emulex mini-port driver.
c.
Choose Find Now to search for the LightPulse utility.
Note:
If you cannot find the LightPulse
utility, contact Emulex technical support.
d.
Select lputilnt.exe from the Find: Files named list box, and then press Enter. The LightPulse
Utility/NT window opens.
4.
In the LightPulse Utility/NT window, the installed adapters are displayed in list box on the left
side of the window. Verify that the installed adapters are displayed.
5.
In the LightPulse Utility/NT window, in the Category list box, choose the Configuration Data
option. In the Region list box, choose the 16 World-Wide Name option. The WWN of the
selected adapter is displayed in the list box on the right side of the window.
34
Performing LUN Manager Operations