Changing the name or host mode of a host group – HP XP Array Manager Software User Manual
Page 61
2.
In the WWN list, locate WWNs that are not registered in any host group. If the host group
column is blank, the WWN is not registered in any host group. Next, from these WWNs, select
the WWN that you want to delete, and then right-click the selection.
A pop-up menu appears.
3.
Select Erase WWN from the pop-up menu.
4.
Click the Apply button in the LUN Manager window.
A message appears and asks if you want to apply the setting to the storage system.
5.
Click the OK button to close the message.
The settings are applied to the storage system.
Changing the Name or Host Mode of a Host Group
Note
: You cannot perform this operation on host groups for initiator ports.
Warning:
Before you change the host mode of a host group, HP recommends that you first back up
the data on the port to which the host group belongs. The operation for setting the host mode is not
destructive, but data integrity cannot be guaranteed without a backup.
To change the name and/or the host mode of a host group:
1.
Start LUN Manager and display the LUN Manager window (
2.
In the tree, select and right-click the host group.
3.
Select Change Host Group from the pop-up menu.
The Change Host group dialog box (
on page 62) appears.
4.
To change the name of the host group, enter a new name in the Group Name box.
To change the host mode, select the new host mode from the Host Mode drop-down list (for
details, see
5.
If necessary, click the Option button and then select host mode options (see
For detailed information about host mode options, see
6.
Click the OK button to close the dialog box.
The changes are indicated in blue in the tree.
7.
Click the Apply button in the LUN Manager window.
A message appears and asks if you want to apply the setting to the storage system.
8.
Click the OK button to close the message.
The changes to the host group name and the host mode are applied to the storage system.
XP24000 LUN Manager User's Guide
61