HP XP Array Manager Software - Manual (Page 91)

Table 11 LUN Manager Spreadsheet Format
Function Tag
Column [Cha] [Port] [HostGroup] [WWN] [LUN] [LDEV]
1st Cha Port Port Port Port Ldkc
2nd PcbMode Security Switch Group Id Group Id Group Id Cu
3rd AL-PA Group Name WWN LunId Ldev
4th Fabric Host Mode Nickname Ldkc Cmd Dev
5th Blank Connection Option[0:31] Cu Cmd Sec
6th Channel speed Option[32:63] Blank Ldev Blank
7th Blank Option[64:95] Blank Blank
8th Blank
9th Blank
10th Blank
11th Cha Port Port Port Port Ldkc
12th PcbMode Security Switch Group Id Group Id Group Id Cu
13th AL-PA Group Name WWN LunId Ldev
14th Fabric Host Mode Nickname Ldkc Cmd Dev
15th Blank Connection Option[0:31] Cu Cmd Sec
16th Channel speed Option[32:63] Blank Ldev Blank
17th Blank Option[64:95] Blank Blank
Note: When the LUN Manager spreadsheet is exported, the settings are written up to the 10th column
(blank column).
Setting the CHA Mode
The [CHA] tag allows you to set the channel adapter mode. The [CHA] tag is available only for changing
settings. You cannot add or delete the settings with the [CHA] tag definitions. Mainframe settings are not
written on the exported spreadsheet.
Note: When you want to set the initiator/external mix mode for the PCB mode, set HighSpeed just as
when you set the high speed mode.
Table 12 on page 92 lists the available configuration definitions for the [CHA] tag.
XP24000 LUN Manager User's Guide 91