Test fax setup, Use reports, Test fax setup use reports – HP Officejet 6500 User Manual

Page 83

Advertising
background image

Test fax setup

You can test your fax setup to check the status of the device and to make sure it is set
up properly for faxing. Perform this test after you have completed setting up the device
for faxing. The test does the following:

Tests the fax hardware

Verifies the correct type of phone cord is connected to the device

Checks that the phone cord is plugged into the correct port

Checks for a dial tone

Checks for an active phone line

Tests the status of your phone line connection

The device prints a report with the results of the test. If the test fails, review the report for
information on how to fix the problem and rerun the test.

To test fax setup via the device control panel
1.
Set up the device for faxing according to your particular home or office setup

instructions.

2. Make sure the ink cartridges are installed, and that full-size paper is loaded in the

input tray before starting the test.

3. From the device control panel, press Setup.
4. Select Tools, and then select Run Fax Test.

The device displays the status of the test on the display and prints a report.

5. Review the report.

If the test passes and you are still having problems faxing, check the fax settings
listed in the report to verify the settings are correct. A blank or incorrect fax setting
can cause problems faxing.

If the test fails, review the report for more information on how to fix any problems
found.

To set the dial type via the embedded Web server
1.
Set up the device for faxing according to your particular home or office setup

instructions.

2. Make sure the ink cartridges are installed, and that full-size paper is loaded in the

input tray before starting the test.

3. Embedded Web server (network connection): Click the Settings tab, and then click

Device Services in the left pane.

4. Select Run Fax Test in the Test Device Features drop-down menu.
5. Click the Run Test button.

Use reports

You can set up the device to print error reports and confirmation reports automatically for
each fax you send and receive. You can also manually print system reports as required;
these reports provide useful system information about the device.

Use reports

79

Advertising