Removing an alias from all zones – HP H-series Enterprise Fabric Management Suite Software User Manual
Page 64
64
Managing Fabric Zoning
4.
Choose one of the following options to add the port/device:
• Select a port/device in the Port/Device tree, and drag it into the alias. To select multiple
ports/devices, press and hold the Control key while selecting.
• Select a port/device in the Port/Device tree. Click an alias to select multiple ports/devices, press
and hold the Control key while selecting. Select an alias. Select Edit > Add Members.
• Select a port/device in the Port/Device tree. To select multiple ports/devices, press and hold the
Control key while selecting. Select an alias, and then click Insert.
5.
If the port/device you want to add is not in the Port/Device tree, you can add it by doing the following:
• Right-click the selected alias.
• Select Edit > Create Members.
• Select the WWN, Domain/Port, or First Port Address option.
• Enter the hexadecimal value for the port/device according to the option selected: 16 digits for a
WWN member, 4 digits for a Domain/ Port member (DDPP), or a 6-digit Fibre Channel Address
for a First Port Address member (DDPPAA), where DD=domain ID, PP=port number, and
AA=AL_PA.
6.
Click Apply to display the Save Zoning and Error Check dialog box, which presents the following
options:
• Perform Error Check checks for zoning conflicts, such as empty zones, aliases, or zone sets. This
option is recommended before saving. If errors are found, click Close and correct the errors.
• Save Zoning save the changes to the zoning database with an option to activate a zone set. The
Zone set activation dialog box prompts you to activate a zone set. Click Yes, to select and activate a
zone set; click No to save the changes without activating a zone set.
• Close cancels the Apply operation without saving the changes.
7.
Click Close to close the Save Zoning and Error Check dialog box.
8.
Click Close to close the Edit Zoning dialog box.
Removing an alias from all zones
To remove an alias from all zones:
1.
Select a switch or stack in the fabric tree.
2.
Select Zoning > Edit Zoning to open the Edit Zoning window.
3.
If you selected a stack and the zoning database is not identical on all switches in the stack, choose a
switch from the Select Source Switch list. Changes that you make to this switch are distributed to the
other switches in the stack.
4.
Select Edit >Delete Alias to open the Remove dialog box.
5.
Click Yes to remove the alias from all zones.
6.
Click Apply to display the Save Zoning and Error Check dialog box, which presents the following
options:
• Perform Error Check checks for zoning conflicts, such as empty zones, aliases, or zone sets. This
option is recommended before saving. If errors are found, click Close and correct the errors.
• Save Zoning save the changes to the zoning database with an option to activate a zone set. The
Zone set activation dialog box prompts you to activate a zone set. Click Yes, to select and activate a
zone set; click No to save the changes without activating a zone set.
• Close cancels the Apply operation without saving the changes.
7.
Click Close to close the Save Zoning and Error Check dialog box.
8.
Click Close to close the Edit Zoning dialog box.