HP H-series Enterprise Fabric Management Suite Software - Manual (Page 88)

88 Managing Switches
Discard Inactive Automatically removes the previously active zone set when a zone set
is activated on a switch
Implicit Hard Zoning Introduces hardware enforcement of zoning regardless of type. All
zones and all supported zone member types have hardware
enforcement.
Security Auto Save Enable to automatically save security settings to permanent memory
on the switch
Security Fabric Binding Enabled If Enabled, the expected domain ID of a switch is required before the
switch can be attached to the fabric.
Advanced Group
R_A_TOV
Resource allocation timeout value (in milliseconds)
E_D_TOV Error detect timeout value (in milliseconds)
Number of Donor Groups Total number of donor port groups. A donor group is a set of ports on
a switch that can donate buffer credits to one another.
Inactivity Timeout Number of minutes the switch waits before terminating an idle
command line interface session. Zero (0) disables the time out
threshold.
Interop Mode Standard
Legacy Address Format None
In-band Enabled In-band management status. Permits (True) or prevents (False) a switch
from being managed over an ISL.
Principal Switch If there is a domain ID conflict in the fabric, the switch with the highest
principal priority (the principal switch) reassigns any domain ID
conflicts and establish the fabric.
Table 11 Switch data window fields (continued)
Field Description