HP H-series Enterprise Fabric Management Suite Software User Manual
Page 86
86
Managing Switches
Test Fault Code
Code value for the last recorded diagnostic test status recorded on
the switch
Network Group
IPv4 Enabled
Internet Protocol version 4 Enabled or Disabled
IPv4 Address
Internet Protocol version 4 address
IPv4 Subnet Mask
Mask that determines the IP address subnet
IPv4 Gateway
Gateway address
IPv6 Enabled
Internet Protocol version 6 Enabled or Disabled
IPv6 Address
Mask that determines the IP address subnet
IPv6 Gateway
Gateway address
SNMP Enabled
SNMP Enabled or Disabled
SNMP v3 Security Enabled
SNMP v3 Security Enabled or Disabled
Broadcast Support
Broadcast support status. Broadcast support is enabled (default) or
disabled.
NTP Client Enabled
NTP Client Enabled or Disabled. If Enabled, this parameter enables
switches to synchronize their time to a centralized server.
NTP Server Address
IP address of the centralized NTP server. Ethernet connection to NTP
server is required.
DNS Enabled
Domain Name Service Enabled or Disabled
Configured Local Hostname
Requested hostname for the switch. If a fully qualified domain name is
given, the domain suffix is used as the first suffix in the DNS search
list for DNS lookups performed by the switch.
Assigned Hostname
Actual hostname for the switch. If a fully qualified domain name is
given, the domain suffix is used as the first suffix in the DNS search
list for DNS lookups performed by the switch.
IPv6 Assigned Address (1–20)
The set of IPv6 addresses assigned by DHCP v6, NDP, or the switch
administrator
User Login Group
User Name
Account name
Login Level
Authority level of the user name
Super User
Super user privileges Enabled or Disabled
UserAuthentication Enabled
Enforcement of account names and authority (always True)
Firmware Group
Firmware Version
Active firmware version
Inactive Firmware Version
This field does not apply to this switch
Pending Firmware Version
Firmware version that is activated at the next reset
PROM/Flasher Version
Installed version of PROM firmware
Table 11
Switch data window fields (continued)
Field
Description