Removing a zone member, Removing a zone from a zone set, Removing a zone from all zone sets – HP H-series Enterprise Fabric Management Suite Software User Manual
Page 62
62
Managing Fabric Zoning
Removing a zone member
Removing a zone member affects every zone and zone set in which that zone is a member. To remove a
member from a zone:
1.
Select a switch or stack in the fabric tree.
2.
Select Zoning > Edit Zoning to open the Edit Zoning window.
3.
If you selected a stack and the zoning database is not identical on all switches in the stack, choose a
switch from the Select Source Switch list. Changes that you make to this switch are distributed to the
other switches in the stack.
4.
Select Edit > Remove to open the Remove dialog box.
5.
Click Yes to remove the zone member.
6.
Click Apply to display the Save Zoning and Error Check dialog box, which presents the following
options:
• Perform Error Check checks for zoning conflicts, such as empty zones, aliases, or zone sets. This
option is recommended before saving. If errors are found, click Close and correct the errors.
• Save Zoning save the changes to the zoning database with an option to activate a zone set. The
Zone set activation dialog box prompts you to activate a zone set. Click Yes, to select and activate a
zone set; click No to save the changes without activating a zone set.
• Close cancels the Apply operation without saving the changes.
7.
Click Close to close the Save Zoning and Error Check dialog box.
8.
Click Close to close the Edit Zoning dialog box.
Removing a zone from a zone set
To remove a zone from a zone set:
1.
Select a switch or stack in the fabric tree.
2.
Select Zoning > Edit Zoning to open the Edit Zoning window.
3.
If you selected a stack and the zoning database is not identical on all switches in the stack, choose a
switch from the Select Source Switch list. Changes that you make to this switch are distributed to the
other switches in the stack.
4.
In the Edit Zoning dialog box, select the zone to be removed. The selected zone is removed from that
zone set only.
5.
Select Edit > Remove to open the Remove dialog box.
6.
Click Yes to remove the zone from the zone set.
7.
Click Apply to display the Save Zoning and Error Check dialog box, which presents the following
options:
• Perform Error Check checks for zoning conflicts, such as empty zones, aliases, or zone sets. This
option is recommended before saving. If errors are found, click Close and correct the errors.
• Save Zoning save the changes to the zoning database with an option to activate a zone set. The
Zone set activation dialog box prompts you to activate a zone set. Click Yes, to select and activate a
zone set; click No to save the changes without activating a zone set.
• Close cancels the Apply operation without saving the changes.
8.
Click Close to close the Save Zoning and Error Check dialog box.
9.
Click Close to close the Edit Zoning dialog box.
Removing a zone from all zone sets
To remove a zone from all zone sets:
1.
Select a switch or stack in the fabric tree.
2.
Select Zoning > Edit Zoning to open the Edit Zoning window.
3.
If you selected a stack and the zoning database is not identical on all switches in the stack, choose a
switch from the Select Source Switch list. Changes that you make to this switch are distributed to the
other switches in the stack.