HP StorageWorks Modular Arrays - Manual (Page 17)

Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: Compaq StorageWorks 64-Bit PCI-To-Fibre Channel Host Bus Adapter User Guide Comments:
Part Number: AA-RKPDA-TE 173941-001 File Name: C-CH2 INSTALLATION.DOC Last Saved On: 12/22/99 10:06 AM
Chapter
2
Installation
Installation Overview
This chapter provides step-by-step instructions for installing the 64-Bit PCI-to-
Fibre Channel Host Bus Adapter (HBA) including:
■ Verification of hardware, software, and document requirements
■ Recording reference numbers
■ Installing the HBA and connecting media
This chapter also provides information on installation guidelines and
supported configurations for the operating systems.
IMPORTANT: The HBA contains static-sensitive components. Comply with Electrostatic
Discharge (ESD) procedures.
Hardware Requirements
The system hardware requirements for installing the HBA include:
■ One open 32- or 64-bit PCI bus slot with a 5.0 VDC signaling interface
■ Maximum PCI bus clock rate of 33 MHz