Troubleshooting, Introduction, Post conditions and results – HP StorageWorks Modular Arrays User Manual
Page 31: Chapter
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: Compaq StorageWorks 64-Bit PCI-To-Fibre Channel Host Bus Adapter User Guide Comments:
Part Number: AA-RKPDA-TE 173941-001 File Name:
E-CH4 TROUBLESHOOTING.DOCe-ch4 Troubleshooting.doc
Last Saved On:
12/22/99 10:10
AM12/20/99 6:07 PM
Chapter
4
Troubleshooting
Introduction
The Power-On Self Test (POST), valid for Windows NT, Tru64Unix, and
OpenVMS operating systems and the Windows NT System Event Logger
(Viewer) are troubleshooting utilities for the 64-Bit PCI-To-Fibre Channel
Host Bus Adapter (HBA). This chapter explains the use of these utilities in
the event of an HBA problem.
POST Conditions and Results
Table 4-1 lists the HBA LED states with descriptions of each. . The position
of the Post LED indicators is defined in Figure 1-1 and Table 1-1 of this
manual.
If the LEDs indicate a failure during POST:
1.
Make sure that the HBA is seated firmly in the PCI slot.
2.
Verify that the fibre cable connection to the HBA is secure.