Start-up for alpha/i386 systems – HP StorageWorks Modular Arrays User Manual
Page 52
5-4 Compaq StorageWorks 64-Bit PCI-To-Fibre Channel Host Bus Adapter User Guide
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: Compaq StorageWorks 64-Bit PCI-To-Fibre Channel Host Bus Adapter User Guide Comments:
Part Number: AA-RKPDA-TE 173941-001 File Name:
F-CH5 FIRMWARE AND DIAGNOSTIC UTILITY.DOCf-ch5 Firmware and Diagnostic Utility.doc
Last
Saved On:
12/28/99 8:56 AM12/21/99 11:52 AM
Start-Up for Alpha/i386 Systems
The diagnostic program performs preliminary analysis of the HBA before
displaying its Main menu. If no HBA is found, the program exits. Error
messages are displayed on failure conditions.
During startup, the diagnostic and firmware download utility program:
1.
Looks for installed PCI HBAs.
2.
Executes preliminary testing on all installed HBAs. Tests include:
a.
SLIM memory test.
b.
BIU register test.
c.
BIU configuration registers test.
3.
Reports pass or fail status messages.
4.
Resets the HBAs.
5.
Checks Power-On Self Test (POST) status of HBAs.
6.
Reports revision levels of diagnostic and functional firmware.
7.
Displays the resources of each HBA.
The following is a sample output of the diagnostic and firmware download
utility Start-Up Procedure.
WELCOME TO HOST DIAGNOSTIC UTILITY Revision x.x
Host Adapters found in the system: 1
PRELIMINARY TESTING of Host Adapter 1
Host Adapter 1: PASS 0xA: SLIM Memory Tests
WELCOME TO HOST DIAGNOSTIC UTILITY Revision x.x
Host Adapter 1: Pass 0xA: BIU Registers Tests
Host Adapter 1: Pass 0xA: BIU Configuration Registers Tests
Adapter 1 PASSED PRELIMINARY TESTS