Viewing hba parameters – HP StorageWorks Modular Arrays User Manual
Page 60
6-2 Compaq StorageWorks 64-Bit PCI-To-Fibre Channel Host Bus Adapter User Guide
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: Compaq StorageWorks 64-Bit PCI-To-Fibre Channel Host Bus Adapter User Guide Comments:
Part Number: AA-RKPDA-TE 173941-001 File Name: G-CH6 USING LPUTILNT UTILITY.DOC Last Saved On: 12/8/99 11:01 AM
Viewing HBA Parameters
To view HBA parameters:
1.
Double click on the LPUTILNT.EXE to start the diagnostic utility.
The following Main menu screen appears (Figure 6-1).
Figure 6-1. Main menu screen
2.
Select an HBA.
3.
On the menu bar, click on an HBA or pull down the category list.
4.
Select an option to view HBA parameters.
There are eight options available, each displaying a different group of HBA
parameters:
■
Adapter Revision Levels – View information about the chipset and
firmware revision levels of the selected HBA.
■
Firmware Maintenance – View detailed information about the firmware
in the flash ROM of the selected HBA. You can also:
q
Upgrade HBA firmware
q
Manage existing firmware
q
Enable or disable the HBA’s Boot BIOS