HP Workstation xw8000 - Manual (Page 107)

4-41
Using the Command Line Interface
enclosure prepare slot {enclosure} {slot}
Prepares a device in a slot for insertion/removal.
Parameters
{enclosure}—ID associated with the enclosure
management device on which to prepare a slot.
{slot}—Unit number associated with the slot.
enclosure set alarm [/on{=boolean}] {enclosure}
Turns the audible alarm on or off.
Parameters
{enclosure}—ID associated with the enclosure
management device whose audible alarm to set.
Switches
/on—Specifies whether to turn the audible alarm on or off.
enclosure set door [/lock{=boolean}] {enclosure}
{door}
Locks or unlocks a specific door on a specific enclosure.
Parameters
{enclosure}—ID associated with the enclosure
management device on which to lock the door.
{door}—Unit number of the door.
Switches
/lock—Specifies whether to lock the door associated with
the unit number.
enclosure set fan [/off{=boolean}] {enclosure}
{fan} [{speed}]
Sets the speed of a specific fan.
Parameters
{enclosure}—ID associated with the enclosure
management device on which to set the speed of a fan.
{fan}—Unit number associated with the fan.
{speed}—Speed at which to set the fan.
Switches
/off —Specifies whether to turn off the fan.
UG.book Page 41 Saturday, October 26, 2002 12:08 PM