HP Workstation xw8000 - Manual (Page 90)

4-24
Adaptec SCSI RAID 2120S/2200S Software User’s Guide
container promote {container}
Creates a multilevel volume from a RAID 0 or a single entry
volume.
Parameters
{container}—ID of the array to promote into a multilevel
array.
container readonly {container}
Sets the protection on the array to read-only access.
Parameters
{container}—ID of the array to set to read-only access.
container readwrite {container}
Sets the protection on an array to read-write access.
Parameters
{container}—ID of the array to set to read-write access.
container reconfigure [/stripe_size{=integer}]
[/mirror{=boolean}] [/partition_move{=boolean}]
[/partition_size{=integer}] [/raid5{=boolean}]
[/raid10{=boolean}] [/restart{=boolean}]
[/stripe{=boolean}] [/volume{=boolean}]
[/wait{=boolean}] {container} [{scsi_device}...]
Changes the configuration of an array.
Parameters
{container}—ID number of the array to reconfigure.
{scsi_device}...—One or more SCSI devices.
Switches
/stripe_size—Stripe size of the array.
/mirror—Reconfigure the array into a RAID 1.
/partition_move—Specifies that the array will move
partitions instead of add extra space.
/partition_size—Size of a partition.
/raid5—Reconfigure the array into a RAID 5.
UG.book Page 24 Saturday, October 26, 2002 12:08 PM