HP XP Array Manager Software - Manual (Page 197)

Description Subfield Field
Click Parity group selection rule, and select one of the following parity
group selection rule options:
• Balance Capacity (use the least utilized parity groups first)
• Maximum Coverage (use the maximum number of parity groups)
• Minimum Coverage (use the minimum number of parity groups)
Click Next to conclude selecting the tier migration target, and continue on
to Step 3 in this process.
Parity group se-
lection rule
Depending upon the selected storage system, choose one of the following
available migration target options:
• Pool
• Tier
• Volume Criteria
-
Migration-Tar-
get Selection
Click Volume criteria and click >> Advanced Options to specify the volume
criteria settings for the volume migration target.
Volume criteria
Click >> Advanced Options to display the Volume criteria options.
Note: The Volume criteria drop-down list choices you make affect each
subsequent criteria option for the migration volume target. For details on
setting these options, see >> Advanced Options in Step 1 in this table.
Migration-Target
Selection:
Volume criteria
>> Advanced
Options
Click Parity group selection rule, and select one of the following parity
group selection rule options:
• Balance Capacity (use the least utilized parity groups first)
• Maximum Coverage (use the maximum number of parity groups)
• Minimum Coverage (use the minimum number of parity groups)
Click Next to conclude selecting the migration target, and continue on to
Step 3 in this process.
Parity group se-
lection rule
3. Migration Pair
Edit migration pairs.
Click Analyze Performance to display a report of historic performance for
one or more selected migration pairs (this requires an HP XP7 Performance
Advisor license).
-
Analyze Per-
formance
Click Do Not Migrate to remove one or more selected migration pairs from
migration consideration.
-
Do Not Mi-
grate
Click Restore Default Pairs to restore one or more selected migration pairs
to default values.
-
Restore De-
fault Pairs
From the other candidate pools for migration list, click Map Pools to select
other pools to map into the migration process.
Click Next to conclude editing the migration pairs, and continue on to
Step 4 in this process.
Note: If you selected any option besides Pool in Step 2 of this wizard, you
would click Map Volumes to select other volumes to map into the migration
process, and this list table would be titled Other Candidate volumes for
Migration.
-
Other Candid-
ate pools for
Migration
User Guide 197