HP XP Array Manager Software - Manual (Page 222)

x x x x
For a Volume search, using Attribute, you can specify Storage System
Vendor, or Storage System Model (useful if you have multiple storage
systems of the same type). The Value drop down provides available
vendors or models. You can invert the search results using the is/is not
operator. The +/- buttons allow the addition or removal of additional
search conditions. When switching to other supported search types,
investigate the Attribute and Value fields to see what is available.
Storage System
x x - x
For a Volume search, using Attribute you can specify a Parity Group,
Pool ID, or LDEV ID as the means of locating volumes. The Value field
prompts for ID information. The is between operator lets you find volumes
in a range, for example, LDEV IDs 00:00:00-00:00:05.
ID/Num-
ber/Name
- - - x
For a Volume search, using Attribute you can specify Allocated, then
qualify it using a Yes/No selection in the Value field.
Allocation
- - - x
For a Volume search, using Attribute you can specify THP Volume Type,
then qualify it with Basic, THP, or THP Pool in the Value field.
Volume Type
- - - x
For a Volume search, using Attribute, you can specify Label, then
qualify it by entering a label value in the Value field. To use a partial
text string, use the starts with or contains operators.
Label
x - x x
For a Volume search, using Attribute you can specify Drive Type, Drive
Speed (RPM), or Chip Type. Drive types, drive speeds, and chip types
are displayed in Value.
Performance
x - x x
For a Volume search, using Attribute you can specify RAID Level or
Copy type and role. RAID levels or replication types will be displayed
in Value. Note there may be 20 or more replication types listed so you
can be very specific in your search.
Availability
x x - x
For a Volume search, using Attribute you can specify Volume Capacity,
Physical drive size, Used Capacity, or Used %. Enter a GB, TB, or MB
value in Value.
Capacity
- - - x
For a Volume search, using Attribute you can specify I/O Consumer
Host, Storage Port, or Host Group/iSCSI Target. Enter a text value in
Value. This category is meaningless if searching for unallocated volumes.
Consumer
- - - x
For a Volume search, using Attribute you can specify Encryption, and
then qualify it using a Yes/No selection in the Value field.
Security
- - - x
For a Volume search, using Attribute you can specify Volume Lock
Status, and then qualify it using a Locked/Unlocked selection in the
Value field.
Migration
- - - x
For a Volume search, using Attribute you can specify Emulation, and
then qualify it by your selection in the Value field (for example, Open-
V emulation).
Emulation
- - - x
For a Volume search, using Attribute you can specify CLPR or SLPR,
and then enter a number, for example 1, in the Value field. Logical Parti-
tions
Managing storage system information 222