HP Insight Control - Manual (Page 15)

Table 8 Hyper-V scripted install default settings (continued)
Default setting Component
The computer name uses the 15 right-most characters of the console display name. Computer name
Firewall settings are disabled. Firewall
Added to workgroup "WORKGROUP". SNMP and WMI are enabled. Networking
Table 9 ESX scripted install default setting
Default setting Component
The root password is password. This password is stored in encrypted form in the kickstart
file. HP recommends changing the default root password. Root password
When configuring the disk partition for a scripted operating system installation, various
VMware ESX Server specific partitions are created. These settings are default. Do not
change them. Drive configuration
The host name uses the console display name. Host name
VMware ESX Server specific packages are installed. Do not change this setting. Packages
Firewall settings are disabled. SSH configuration modified to allow root login. Firewall
Virtualization Host features 15