HP GRACO OR PRO TI1681A User Manual

Instructions/parts list, Wb100 isolation system and pro, Xs3 spray gun

Advertising
background image

Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441

Copyright 2002, Graco Inc. is registered to I.S. EN ISO 9001

TI1681A

WB 100
Isolation Enclosure

PRO Xs3
Smart Gun and
Fluid Hose

TI2139a

100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure

100 psi (0.7 MPa, 7 bar) Maximum Working Fluid Pressure

For use when electrostatically spraying conductive,
waterborne fluids that meet at least one of the
following conditions for non-flammability:

FM Approved

The fluid has a flash point above 140

°

F (60

°

C)

and a maximum organic solvent concentration of
20%, by weight, per ASTM Standard D93. FM

The fluid does not sustain burning when tested per
ASTM Standard D4206 Sustained Burn Test.

CE-EN 50059 Compliant

Materials which cannot be ignited, in any mixture
with air, by an energy source of less than 500 mJ.

See page 3 for a List of Models

U.S. Patent No. 7,226,004

Important Safety Instructions

Read all warnings and instructions in this manual.
Save these instructions.

309293J

Instructions/Parts List

ELECTROSTATIC, WATERBORNE, AIR SPRAY

WB100 Isolation System and

PRO

Xs3 Spray Gun

Advertising