HP GRACO OR PRO TI1681A - Manual (Page 24)

Operation
24 309293J
13. Check that the ES indicator or display is lit, or check
that the kV indicator on the isolated enclosure reads
45-55 kV. If not, see Electrical Troubleshooting on
page 39 for possible problems.
14. Check the kV meter on the isolated enclosure;
45-55 kV is normal.
15. Spray a test piece. Examine the edges for coverage.
If wrap is poor, see Spray Pattern Troubleshoot-
ing on page 37.
16. When you finish spraying, perform the Shutdown
procedure on page 25.
ti1266a
I O ES
ti1253a
100 % KV
μα
0
HI
LO ES
I O I O ES
ti1285a