Static analysis – HP Insight Control User Manual
Page 66
Static analysis
The following configuration information is gathered by hardware discovery and analyzed by
performance management to display the performance status of server components:
•
Processors—For example, a mix of processors with different cache sizes
•
Memory
•
Network connections—For example, the ability to detect a NIC running at reduced speed or
in half-duplex mode
•
Host buses—For example:
Bus overloading
◦
◦
Too many I/O resources plugged into the same bus on a multi-bus server
•
Storage—For example:
◦
A fast physical disk drive plugged into an enclosure that cannot support the maximum
I/O capabilities of the drive
◦
A slow physical drive plugged into a fast enclosure
◦
A RAID consisting of a mix of drive speeds
◦
A RAID consisting of a mix of drive capacities
66
Measurement parameter matrix