HP ProLiant BL420c Gen8 Server Blade - Manual (Page 42)

Hardware options installation 42
o Route the cable along the Processor 1 DIMM baffle and connect the cable to the cache module.
o Route the cable along the Processor 2 DIMM baffle and connect the cable to the SAS controller
option.
6. Install the access panel (on page 14 ).
7. Install the server blade (" Installing a server blade " on page 21 ).
HP Trusted Platform Module option
Use these instructions to install and enable a TPM on a supported server blade. This procedure includes three
sections:
1. Installing the Trusted Platform Module board (on page 43 ).
2. Retaining the recovery key/password (on page 44 ).
3. Enabling the Trusted Platform Module (on page 45 ).
Enabling the TPM requires accessing RBSU (" HP ROM-Based Setup Utility " on page 56 ). For more
information about RBSU, see the HP website ( http://www.hp.com/go/ilomgmtengine/docs ).