HP ProLiant BL420c Gen8 Server Blade - Manual (Page 8)

Component identification 8
Item LED Status Definition
1
Locate Solid blue The drive is being identified by a host application.
Flashing blue The drive carrier firmware is being updated or requires an update.
2 Activity ring Rotating green Drive activity
Off No drive activity
3 Do not remove Solid white Do not remove the drive. Removing the drive causes one or more of
the logical drives to fail.
Off Removing the drive does not cause a logical drive to fail.
4 Drive status Solid green The drive is a member of one or more logical drives.
Flashing green The drive is rebuilding or performing a RAID migration, stripe size
migration, capacity expansion, or logical drive extension, or is
erasing.
Flashing
amber/green
The drive is a member of one or more logical drives and predicts
the drive will fail.
Flashing amber The drive is not configured and predicts the drive will fail.
Solid amber The drive has failed.
Off The drive is not configured by a RAID controller.
System board components
Item Description
1
System maintenance switch
2 System battery
3 Hard drive backplane connector
4
Processor socket 2
5 SAS controller connector
6 Processor 1 DIMM slots
7 Cache module connector
8 Mezzanine connector 1 (Type A mezzanine only)
9 Mezzanine connector 2 (Type A or type B mezzanine)