HP Lights-Out 100 Remote Management User Manual
Page 50
To install a certificate through the browser:
1.
Log in to LO100 as an administrator.
2.
On the browser main menu navigation bar, click Security Settings.
3.
In the TFTP server IP address field, enter the IP address of the TFTP server.
4.
On the menu under File type, select Certificate.
5.
Enter the file name of the certificate created (server_cacert.pem) in the File Name field.
Include the path relative to the TFTP server root in the file name.
6.
Click Apply.
To install the private key through the browser:
1.
Log in to LO100 as an administrator.
2.
On the browser main menu navigation bar, click Security Settings.
3.
In the TFTP server IP address field, enter the IP address of the TFTP server.
4.
On the menu under File type, select Key.
5.
Enter the file name of the key created (server_privkey.pem) in the File Name field. Include
the path relative to the TFTP server root in the file name.
6.
Click Apply.
To install the both the certificate and private key through the browser at the same time:
1.
Log in to LO100 as an administrator.
2.
On the browser main menu navigation bar, click Security Settings.
3.
In the TFTP server IP address field, enter the IP address of the TFTP server.
4.
On the menu under File type, select Key and Certificate.
5.
Enter the file name of the certificate (server_cacert.pem) and key created (server_privkey.pem)
in the File Name field. Include the path relative to the TFTP server root in the file name.
6.
Click Apply.
Installing a certificate or private key through the CLP
To install a certificate, log in to LO100 as administrator through the CLP interface and issue the
load command to upload and install the certificate. For example:
load -source <URI> -oemhpfiletype cer
50
Using LO100