HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem User Manual

Page 154

Advertising
background image

Server management 154

which means that untagged packets are placed on that vNet, and the VC-Enet module also transmits

untagged to the server for that network.
The 'untagged' network defaults to be the 'Native' network, but it does not have to be the same as the

'Native' network on the shared uplink set. In fact, each server port can designate a different untagged

network. The external VLAN mapping is ignored when the network is untagged.
With this 'forced' option selected, the server connection VLAN mappings are linked to the chosen shared
uplink set. Any change to the uplink VLAN mappings is reflected automatically on the server connection

using those shared uplink set VLAN mappings. Therefore, to minimize network outage time, any VLAN

mapping changes to the uplinks requires immediate changes being made to the VLAN tagging on the

servers.

No Forced VLAN Mappings
If the 'Force same VLAN mappings as Shared Uplink Sets' option is not selected, users can choose

available networks and assign a unique server VLAN associated with the network for this server port. Not

forcing VLAN mappings provides greater flexibility in selecting the set of networks to connect to each
server port, and enables administrators to specify server VLAN mappings independent of those assigned

by the network administrator for the shared uplink sets. The untagged option is always available, but it

might be unassigned, that is, any untagged frame from the server is dropped. Each network can be

selected only once per server port. Similarly, each server-assigned VLAN must be unique per server port.
This option is not available if the domain-wide 'Force server connections to use the same VLAN mappings

as shared uplink sets' checkbox on the Advanced Settings tab of the Ethernet Settings screen is selected.
If the selected network is part of a shared uplink set, it has an associated external VLAN mapping. This

external VLAN is used to pre-populate the server-assigned VLAN entry to maintain consistency throughout

the VC domain. However, multiple networks on different shared uplink sets can have the same external

Advertising