HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 167)

Domain management 167
For additional information, see "Interconnect Bay summary screen (Ethernet module) (on page 198 )" and
"Administrative module removal (on page 210 )."
The following table describes the available actions in the Domain Settings (Domain Configuration) screen.
Clicking another link in the pull-down menu or left navigation window causes current edits that have not
been applied to be lost.
Task Action
Change the domain name Enter the revised domain name, and then click Apply.
Display single-dense server bays Click the checkbox next to the appropriate selection. Available if
double-dense compatibility is selected during import.
Delete a domain Verify that the correct domain name is displayed, and then click
Delete Domain. See "Deleting a domain (on page
167 )."
Save changes and remain on this screen Click Apply.
Clear the enclosure checkboxes
Click Cancel.
Deleting a domain
CAUTION: Deleting a domain returns all settings to factory default. This action cannot be
undone.
1. Power off all servers that are associated with profiles. See "Server Bay Status screen (on page
218 )."
2. Navigate to the Domain Settings (Domain Configuration) screen (on page 166 ).