HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 169)

Domain management 169
Task Action
Use a domain IP address Select the box next to Use Domain IP address, and then enter the IP
Address, Subnet Mask, and Gateway.
Clear unsaved changes on the screen Click Clear.
Save changes and remain on this screen Click Apply.
Cancel without saving changes
Click Cancel.
Domain Settings (Domain Enclosures)
This screen displays information about the domain enclosure.
Domain Settings (Backup/Restore) screen
Use this screen to create a backup file of the Virtual Connect domain configuration or to restore a
configuration that has been lost. The domain configuration includes network definitions, MAC address
settings, WWN settings, Fibre Channel fabric settings, local user accounts, and server profile definitions.
The backup file stores the same information that is check-pointed between the active and standby modules
during normal operation.
IMPORTANT: Virtual Connect Manager cannot use backup configurations created with
previous versions of Virtual Connect Manager. For example, if you are currently using v2.00,
you cannot use a backup configuration that was created using v1.20.