HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 66)

HP Virtual Connect Manager 66
Enter the user name and password for the enclosure Onboard Administrator. The local enclosure is
automatically detected and selected. If an error is displayed, it indicates that an invalid Onboard
Administrator user name and password, or one without sufficient privileges, might have been used.
Enclosure Import/Recovery
After the Virtual Connect Manager has successfully established contact with the Onboard Administrator,
you can create a Virtual Connect domain by importing the enclosure or by restoring a previously-created
Virtual Connect domain from a saved configuration file.
If you plan to use double density server blades, select the 'Allow the double density device bays'
checkbox to display server device bays as double density slots. Actual installed hardware overrides this
option.
CAUTION: This option cannot be modified. After the enclosure is imported, the only way to
display server device bays as single density slots again is to delete the domain and create a
new one.
For additional information, see "Using double-dense server blades (on page 68 )."
Select the appropriate method for creating the Virtual Connect domain.
• To create the Virtual Connect domain by importing an enclosure, select the 'Create a new Virtual
Connect domain' radio button, and then click Next. This process can take several minutes as the
Virtual Connect Manager establishes contact with each module in the enclosure and identifies its
capabilities.