Stacking links – HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem User Manual
Page 78
HP Virtual Connect Manager 78
Select the type and range of MAC address, and then click Next.
Selecting VC-assigned MAC address ranges
When using VC-assigned MAC addresses, you can choose between using an HP pre-defined MAC
address range or using a user-defined MAC address range.
•
HP pre-defined MAC address range (recommended). These pre-defined ranges are reserved and will
never show up as factory default on any hardware. There are 64 ranges of 1024 unique addresses
to choose from. Be sure to use each range only once within a data center.
•
User-defined MAC address range. To avoid potential conflict with other hardware MAC addresses
in the environment, consider using a subrange of MAC addresses reserved by the IEEE for locally-
administered MAC addresses. Ensure that the range does not conflict with any Ethernet device
already deployed within the enterprise.
IMPORTANT:
If you plan to use RDP for RedHat Linux installation and also plan to use User- or
HP-defined MAC addresses, you must import the enclosure before running RDP.
Select the type and range of MAC address, and then click Next.
NOTE:
After any server profiles are deployed using a selected MAC address range, that
range cannot be changed until all server profiles are deleted.
Stacking Links
Be sure to connect any Ethernet module stacking cables before running the setup wizard.