Hp virtual connect fibre channel setup wizard, P wizard, Hp virtual connect fibre – HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem User Manual
Page 85: Channel setup wizard
HP Virtual Connect Manager 85
2.
Click Finish. The Fibre Channel Wizard Welcome screen is displayed.
To begin deploying server blades:
1.
Be sure the Start Fibre Channel Wizard checkbox is not selected.
2.
Click Finish.
3.
Select Define Server Profile from the homepage.
Additional network connections can be defined at any time by using one of the following methods:
•
Select the Define a Network link on the homepage.
•
Select the Define a Shared Uplink Set link on the homepage.
•
Select Ethernet Network from the Define pull-down menu.
HP Virtual Connect Fibre Channel Setup Wizard
This wizard configures external Fibre Channel connectivity for the HP BladeSystem c-Class enclosure using
HP Virtual Connect. A user account with storage privileges is required to perform these operations. Use
this wizard to do the following:
•
Identify WWNs to be used on the server blades deployed within this Virtual Connect domain.
•
Create SAN fabrics.